The European Standard EN 13060 defines three types of sterilization cycles, differing in their intended use: Type B, Type S and Type N, all classified as Small Steam Sterilizers. Celitron’s Sting 11 Sterilizers offer a solution to each type, allowing you to choose the most suitable Sterilizer for your needs.

The Sting 11 Bench-Top Steam Sterilizers have a load capacity of 23 liters volume in the chamber, either jacketed or electrically heated. External dimensions are suitable especially for small clinics. The Sting 11 Sterilizers have numerous safety features including: a thermostat, temperature sensors, a water detection electrode in the chamber, a pressure sensor, a safety pressure release valve and software safety features.

The Sting 11 Sterilizers are equipped with an Energy Saving Mode which is activated if the sterilizer is not used after a certain period of time. This Mode reduces power consumption by approximately 12% to 30% and is thus environmental friendly. The Sting 11 Sterilizers meet the highest standards requirements for quality, safety and operation. Stainless Steel Pressure Vessels 316 Ti, conforms to the Pressure Equipment Directive (PED).

The Sting 11 Sterilizers have a fully automatic door-locking device. Opening and closing of the door by pressing only one button.
The Sterilizer is supplied as a stand-alone unit. A Reverse-Osmosis water purification system is available in order to avoid the need to refill the water reservoirs. This system improves the quality of the water used to generate steam. The use of mineral-free water will contribute to better performance and longer life of the sterilizer’s chamber.

The sterilization cycles’ data of the Sting 11 Sterilizers can be collected through an optional SD card.
The design of the Sting 11 Sterilizers is modern; the units are reliable and incorporate high-tech features based on more than 20 years of experience in the sterilization field.