Home >> Products > Medical Waste Medical Waste Brochure     Contact Us
Products











Celitron Medical Technologies Kft.
Avar Utca 5, 2600 Vác, Hungary
Phone:(36) 27512267
Fax:    (36) 27512268
Email:info@celitron.com Website:www.celitron.com
Ordering Information
  Option 1 - LOADING EQUIPMENT
Each Sterilizer can be supplied with stairs or a forklift which enables automatic loading of the waste and admitting it straight into the chamber for shredding and sterilization.

  Option 2 - AIR COMPRESSOR
Electrically operated air compressor is inserted into the Sterilizer for normal operation. The air is used to operate the unit>s ball valves and/ or power door.
  Option 3 - REVERSE-OSMOSIS
A Reverse-Osmosis system must be used to improve the quality of the water used to generate steam in the electric steam generator. The use of mineral-free water contributes to better performance and longer life of the Sterilizer’s chamber. The water purification system uses a high quality booster pump which can provide 6.8 bar water pressure to pass through the membrane even under low water pressure area. The booster pump prevents damage and prolongs the life of the membrane and improves the TDS rejection of 26.4 or 52.8 liter per day. It is capable of removing over 96% of total dissolved solids +99% of all organics and +99% of all bacteria.
  Option 4 - MONITORING AND DOCUMENTATION SOFTWARE
Powerful PC windows based software is available for monitoring, logging, control and service.
  Option 5 - WATER SAVING SYSTEM
The water saving system is supplied to reduce the amount of water used during the sterilization (pre-vacuum, sterilization and exhaust) cycle. This is accomplished by utilization of a heat exchanger.